Contact service personnel
If a robot is damaged or cannot work for any other reason, please contact Magazino Service.
There are three ways to reach the service department.
Website: http://support.magazino.eu
E-Mail: support@magazino.eu
Phone: +49 (0) 89 381-682-808
The robot's Internet connection enables service personnel to access the individual robots. Access via the Internet enables remote maintenance and possible troubleshooting.
Information required for remote maintenance:
-
Your name.
-
Name of the company.
-
Number of the robot.
-
Time of the problem.
-
Error message and description.
Troubleshooting issues
|
Error |
Possible cause |
Solution |
|---|---|---|
|
The robot drives only at a safe speed. |
The protective field of the laser scanners is violated. |
Step out of the protective field of the laser scanner. Remove objects from the protective field of the laser scanner. |
|
Reflector marks on the shelf are removed or covered. |
Make sure all reflector marks are present and clear. |
|
|
Robot does not drive. |
Emergency stop button activated. |
Unlock the emergency stop buttons (see "Unlocking the emergency stop button"). |
|
The bumper is triggered. |
Free the triggered bumper. |
|
|
No order assigned. |
Assign a job to the robot. |
|
|
The battery is discharged. |
Charge the battery manually (see "Charging the robot manually"). |
|
|
Wi-Fi in the picking warehouse is deactivated. |
Activate the Wi-Fi in the picking warehouse. |
|
|
The robot is turned off via the key switch. |
Activate the robot (see“Switch on the robot”). |
|
|
The robot does not start working after the emergency stop button is activated. |
Emergency stop button not unlocked. |
Unlock the emergency stop buttons (see “Unlock the emergency stop button”). |
|
|
The tower was not closed before acknowledging the fault. |
Rotate the Tower with the opening towards the Backpack and press the pushbutton (see “Closing the Tower”). |